EHS environmental health and safety professional solution provider
Production Intruduction
1、The water treatment rod is an immersion-type device.
2、The product is installed in a water storage device and is in direct contact with the water.
3、The material is an aluminium alloy, which generally requires a pH value of between 6 and 9.5.
4、This treatment method is suitable for large-scale water systems and can be installed in reservoirs or water tanks.
5、The number of units to be installed must be determined by engineering and technical personnel based on factors such as water quality, scale sample, water flow, and working environment.
6、This product is designed to enhance the water treatment capabilities of a large water treatment system.
The Teterdom bar has been developed by Teterdom Company on the basis of the Wellan water treatment ring. This product has been designed to meet the requirements of large-scale industrial water treatment, offering enhanced effectiveness when used in conjunction with the original water treatment ring. The product’s efficient and stable features have been well-received by users.
Working Principle
Quantum rods are a big step forward in Wellan’s technology.
Wellan’s water treatment technology shows how quantum physics can be used in practice. The core is programmed with a special frequency and uses laser technology to record this ultra-fine oscillation on a special silicon-aluminium alloy.
The dielectric material sends pre-recorded ultra-fine vibration waves to the medium (such as water or oil), which causes it to generate micro-resonance. The vibration of the medium then alters the bonding form between its molecules. The structure of the lime scale becomes looser, the oxidised rust decomposes and falls off, and the bacterial and algal life substances are reduced.
The Quantum Rod is the final step in the application process, enhancing the effectiveness of the Quantum Loop. It can be used to enhance the performance of large and complex water circulation systems by being placed directly in the water.
How To Install
1. Before install quantum bars, technicians need to calculate the usage quantity based on the size of the reservoir, water quality, water flow speed and other parameters.
2. Design the placement of the quantum rods according to the location of the water inlet and outlet and the size of the reservoir.
3.For smaller quantities, the quantum rods are hung from stainless steel chains. If the quantity is large, it needs to be fixed with a customized fixing bracket.
Step 1.
Prepare one each of quantum rods, stainless steel chains, M10 lifting lugs, and D-shaped buckles;
Step 2.
Screw the M10 lifting lug into the side of the quantum rod with the screw hole
Step 3.
Use D-shaped buckles to connect the M10 lifting lugs to the stainless steel chain
Hanging Installation
Bracket / Shelf Installation
Step 4.
According to the amount in the installation plan, the quantum rods are suspended evenly and vertically in water.
Specification
1. Material: Silicon Aluminum Alloy
2. 1 set include: 1 quantum rods, 1 stainless steel chains, 1 M10 lifting lugs, and 1 D-shaped buckles;
| Item Code | Diameter (mm) | Length (mm) |
| L-500 | 50 | 500 |
